Low Noise 3kw Mini On Grid Wind Turbine Generator For Rooftop Mounting
The brief introduction of wind power grid-tied system:
Wind power grid-tie system is a semi-autonomous electrical generation or grid energy storage system which links to the mains to feed excess capacity generated by wind turbine back to the local main electrical grid. When insufficient electricity is generated, electricity drawn from the mains grid can make up the shortfall.
Residences and businesses that have a wind power grid-tie system permitted in many countries to sell their energy to the utility grid. Electricity delivered to the grid can be compensated in either net metering or feed-in-tariff, HYE wind power grid-tie system offers complete system solutions for both compensation ways.
HYGCI series wind power grid-tie inverter is the core part of the whole system, the inverter is developed specially for HY series wind turbine according to HY series wind turbine special features with an optimized power curve pre-written into inverter and smart over-voltage braking protection, which offers a reliable combination of high efficiency, easy-installation, high wind protection and grid-failure protection.
The 3kw on-grid inverter specification:
| |
3KW |
| Model |
HYGCI-30GL |
| Input parameters |
| Range of Input Voltage (DC) |
60V-550V |
| Maximum Power from Turbine |
3600W |
| DC Voltage VPP |
VPP < 10 % |
| Output parameters |
| Rated Power |
3000W |
| Range of Grid Voltage |
Choice of 220, 230 or 240V AC |
| Range of Grid Frequency |
Choice of either 50Hz or 60Hz |
| Power Factor |
> 0.99 |
| Maximum Efficiency |
95% |
| Standby Consumption |
< 11 W |
|
Protections
|
Anti-islanding, Over Temperature, Over Load, Over Current, Over Voltage |
| Total Harmonic Distortion (THD) |
< 4 %
|
| Physical feature |
| Dimensions W×H×D in mm |
465/640/210 |
| Weight |
60kg |
| Protection Level |
IP41 |
| Installation Method |
Wall-mounted |
| Ambient Temperature |
－20 ～＋40 Celsius © |
| Storage Temperature |
－20 ～＋50 Celsius © |
| Inverter feature |
| Cooling Concept |
Convection & Cooling Fan |
| Display |
LCD & Signal Lamps |
| Communication |
RS485 |
| Points of power curve |
Minimum 5, Maximum 20. |
|
EMC
|
EN61000-6-1:2007 |
| EN61000-6-3:2007 |
|
Safety Standard
|
IEC 62103:2003(1st Edition) |
| EN50178:1997 |
|
Certificate for Grid Connection
|
DIN VDE 0126-1-1:2006
|
Maintenance:
The HYGCI-30GL is designed for a minimum amount of maintenance.
We recommend checking the following functions at regular intervals in order to ensure a proper operation of the device:
< Check on a regular basis, preferably weekly, whether the device operates properly. This should be done at different wind conditions. You can recognize the proper operation by means of the displayed operating modes. Serious errors are displayed by the red LED.
< Pollution of the heat sink can restrict the heat dissipation. Check the heat sink for dirt on a regular basis and clean it with a paintbrush, a soft brush or compressed air.
< Clean the display and the LED display with a moist cloth when it is dirty. Do not use harsh cleaning agents (e.g. abrasive), solvent or acid substances!
Product Tags:
|
|
Low Noise 3kw Mini On Grid Wind Turbine Generator For Rooftop Mounting Images
|
